GembaRed OverClocked Body-Light Red and Near-Infrared LED Light Panel
The GembaRed OverClocked Body-Light ushers in a new era of Next Generation red light therapy panels!
- GembaRed's Next Generation body light!
Five wavelengths of 630nm, 660nm, 810nm, 830nm, and 850nm LEDs.
- 60 degree lens angle for focused power delivery.
- High intensity delivered at a distance from the user.
- Ultra low-flicker LED technology.
- Sturdy metal enclosure and smooth features.
- Low-noise cooling fans.
- Low nnEMF panel at recommended usage distance.
- Shielded power cord to eliminate electrical field emissions from the cord and plug area.
- Advanced Controller with Timer and Red/NIR selection with easy and intuitive buttons.
The GembaRed OverClocked Body-Light delivers an impressive 5 wavelengths of Red and NIR light in significant proportions and a beautiful pattern.
For the (invisible) Near-Infrared LEDs we focus a larger percentage on deeper penetrating and more clinically relevant 810nm and 830nm, rather than the cheap standard 850nm LEDs typically used in body-lights.
We take our standard 3W LEDs and push them to higher outputs with powerful drivers. All while maintaining our famous standards for low flicker and low EMF performance.
With sunlight emitting approximately 34 mW/cm^2 of Red and NIR light between 600nm to 900nm, our body-light panels bring safe and effective red light intensity into the home to help "supplement" your light lifestyle. GembaRed is the only panel company that recognizes that too much intensity is counterproductive and that clear research notes we should deliver 3rd party measured intensity in correlation to natural sunlight that our body is biologically tuned to absorb properly.
Our manufacturer is one of the first-ever red light therapy panel suppliers with over 6 years of experience, more than any other factory in the industry!
The GembaRed OverClocked light has a built-in control panel on the side with simple, intuitive, and responsive push-buttons. Now you can set a timer and select either Red, NIR, or both! *for best use, we recommend using both Red&NIR simultaneously*
Comes with a convenient door-hanging kit! Stand is not included, but visit our new guide about how to get an affordable stand from Amazon!
This large body light is ideal to mount on a wall or door (some accessories provided) and stand or sit in front of the device for best effect.
Rated Wattage: 630W LED Panel
Actual Wattage: 320W
# of LEDs: 210 LEDs
LED Specified Wavelengths:
25% - Red 630nm
25% - Deep Red 660nm
14% - Near-Infrared 810nm*
22% - Near-Infrared 830nm*
14% - Near-Infrared 850nm*
*near-infrared bulbs are invisible to the eye and do not emit visible light*
3rd Party Verified Spectrum:
3rd party measured peaks at 635nm, 663nm, 817nm, 835nm, 848nm.
3rd Party Measured Irradiance:
Distance from Panel Power Density
6 Inch 43 mW/cm²
12 Inch 34 mW/cm²
18 Inch 26 mW/cm²
24 Inch 21 mW/cm²
36 Inch 15 mW/cm²
*intensities at 6''-36'' measured from the center point of the panel
Do our power measurements seem low? Find out how our competitors are inflating their numbers! Click Here.
3rd Party Isoirradiance Distribution plot:
Treatment Area: 43 inch x 11 inches at 6 inches away
Total Optical Watts: 106 W
Lens Angle: 60 degrees
Weight: 25 lbs (HEAVY!)
Panel Dimensions: 41.75 inch X 9.25 inch X 2.5 inch
Lifetime: typical 50,000 hours
Conformance: FCC, RoHS
Warranty: 2 Year Limited Warranty
- GembaRed OverClocked LED Panel
- Hanging cords, adjustable height pulley
- Door Hanging Tool
- 3 Meter Shielded Power Cord - US style plug only
6-24 inches away from skin for 15 minutes per session.
Use up to 2 times per day on the desired area.
Input Power: AC 85-264V
Frequency: 50/60 HZ
Enclosure: Metal enclosure with white coating
Flicker Percentage: 0.3 % (very low! practically nothing)
Flicker Index: 0.001
Flicker Frequency: 120 Hz
EMF Measurements (front of the panel):
31 V/m Electric Field
7.74 milliGauss Magnetic Field
5 V/m Electric Field (ambient)
0.64 milliGauss Magnetic Field (low)
5 V/m Electric Field (ambient)
0.50 milliGauss Magnetic Field (near-ambient)
Not Sure Which GembaRed panel is right for you? Check our Product Guide by clicking here.
Shipping within the continental USA is FREE! Please allow 3-6 business days processing time to ship, and an additional 2-10 business days for delivery depending on the location.
We do not ship internationally at this time.
Hanging Instruction sheet: Here
Made In China
** Disclaimer: This panel is designed for general wellness and information provided is for educational use only. As with starting any new general wellness activity such as fitness, diet, or supplementation; we advise you to meet with your wellness practitioner to ensure there are no contraindications with your current condition. Use of GembaRed LLC products or information does not constitute medical advice or treatment, and should not be used as a substitute for medical advice or treatment. Consult your doctor or biohacking coach for recommendations on how to effectively apply red light to your wellness routine.
Love my red light panel…I love it so much I bought the smaller travel one too that I can keep up my red light therapy while traveling. The owner of the company is very helpful and answers questions in a timely manner.
GembaRed OverClocked Body-Light LED Panel
GembaRed is the best! Hard to imagine my life without my red light panel! Helps me with my EDS and many other things!
OverClocked: When I was researching panels, I narrowed my choices to 3, Platinum, Mitoredlight, and Gembared Overclocked. I was looking for full body exposure, so Platinum and MitoRed became my choices. I ended up with MitoRed 1500 and 750. 64 inch coverage. Platinum -- service, BBB ratings, couldn't locate them, only a phone number --- all indicators to stay away, and that's what I did..
Mitoredlight panels are nice, I liked them, but I kept drifting toward 810nm, something in the back of my mind was pushing me to get more 810nm. This was prior to purchasing the 810nm Vector mini. When I started to see some results from the 810nm Vector Mini, in addition to my wife's lack of desire for the lights to be directly on her face, plus, I couldn't easily position the MitoRedlight panels to fit her needs and mine (raising, lowing and configuring the panels for her short stature), confirmed to me the Overclocked was the way to go. I have no regrets, the intensity is close to the MitoRedlight's, but I'm getting more 810nm, which I seem to respond to.
I have a daily flow family using the panel. It has helped with back pain, skin conditions, such as wrinkle reduction. On myself, bags and lines under the eyes are hardly noticeable since using Red Light + NIR. My night vision is clearer, no more blur from on coming lights, I can read street signs easier. On the flip side, my close up vision is still impaired. Occasionally, my focus improves, but only for a short time.
I purchased the Overclocked panel about a week after my experience with the 810 Vector mini.
One of my daughter ended up with the MitoRedLight panels.
M8 X 1.0 - Lanyard Cable Stud, Thread Nuts
M4 X 0.7- Tv Bracket Mount Screws, Back of panel
Pictured is a couple of Modifications I made to the Positioning system due to my daily repositioning of the panel.
I replaced the lanyards with aluminum angle giving me an additional 6 inches of adjustment headroom. With the wall hook at 82 inches, I can almost position the panel top at 75 inches (6'3"). I also removed or replace the hooks for the main pulley system, which gave me another inch or so by the time I added the top pulley.
Adding a top pulley allows me to easily adjust the panel up or down. The pulley release is connected to the aluminum angle for easy access. To lower the panel, I simply pull down and hold the loose end of the top pulley rope. This takes pressure off of the ratchet system of the main pulley allowing me to release the locking ratchet mechanism. While holding the mechanism in the released position, I let out a little rope at a time. Once the desired position has been reached, I stop holding the mechanism and the system locks in place.
To raise, pull down the loose end of the pulley rope.
The Overclocked panel has rubber feet which grip the wall when adjusting its position. To overcome the grip you either have to pull harder or place hard plastic bottle caps on the 1st 2 feet so the panel slides.
Gets the job done at a decent price